Configure VLACP Globally

Use VLACP as an extension to LACP for end-to-end failure detection. Enable or disable VLACP globally to reset the port level configuration. The default is disabled.

About this task

Important

Important

Changes you make at the global level override and reset all port level settings.

Procedure

  1. Enter Global Configuration mode:

    enable

    configure terminal

  2. Enable VLACP globally:

    vlacp enable

  3. Disable VLACP globally:

    no vlacp enable

Example

Enable VLACP globally:

Switch:1(config)# vlacp enable

9039040-00 Rev AB